Rubber foam seal strip of the daily maintenance of what

Although bubble rubber seal strip is the small part in mechanical equipment, but it can make sure switch equipment composed and heavy, still can rise to avoid the effect of wind and rain, dustproof, heat insulation, sound insulation, and to the door window metasomatic marginal rise decorates the effect. When mechanical equipment is subjected to vibration and distortion, the seal also ACTS as a buffer, shock absorption, maintenance of the glass effect. Small tape effect, the following to understand the sealing tape maintenance of common sense it.

1. Check whether the rubber foam sealing strip has big cracks or cracks. If the sealant is cracked, the adhesive can be used to repair. In particular, the use of special adhesive sealant, it is very simple to repair large cracks. Of course, if the damage of sealing tape is severe, or the aging degree is greater, it is recommended to replace the new sealing tape.

2, mechanical equipment in the use of car detergent to clean the doors and Windows sealing tape, coated with a high permeability of the maintenance agent, so both can prevent the aging of the seal and can greatly improve the seal seal. In addition, the gaps between the seals are simply filled with dust, which causes corrosion. For this, should use brush to wait for sand dust to uproot clean.

3. Sunroof is the basic equipment of most family cars. When the sunroof of the car is opened, the rubber seal track is exposed to the air, which inevitably accumulates dust and even runs into small gravel. Prolonged use may cause the skylight to deform due to wear and tear and block the drain. Therefore, it is very important to arrange the track regularly and modify the lubricating oil for the track.

4, equipment windshield attack damage, remember to check whether there is damage seal. Since Windows often do not return to their original shape after repair, make sure you can easily pull or lift the window, and pay attention to the tightness around the window. If vitreous and the aperture of vitreous notch are not equal, rubber strip and vitreous, vitreous groove contact is bad, car owner can pull seal strip easily with the hand.

5, the equipment door and the body of the rubber foam sealing strip request is relatively strict, in addition to the sealing function, there is the car sound insulation noise reduction effect. The door opens and closes frequently. Therefore, to regularly check whether there is a drop, the focus of the view is also the corner of the seal, the place is easy to drop.