How to install the car seal

Automobile sealing strip has the characteristics of sound insulation and dustproof, master the correct installation method, the operation is very simple, the specific operation method is as follows:

1. Thoroughly clean and dry the parts and plane of the sealing strip that need to be installed with sound insulation;

Two, choose the paste position, find the paste starting point according to the beginning of the seal, a little press paste, pay attention to do not have a little pull seal action, try to keep the original seal slowly aligned to find the paste path for careful paste; In the position of the corner of a knot, seal should pay attention to very soft carry on bending to go, do not turn too fast and affect beautiful. In addition, other impurities such as dust should not be stuck to the 3M back adhesive, and it should not be urgent when sticking, so as to ensure the effect so as to ensure the effect so as to ensure the effect;

Three, all paste in place after the inspection is correct, the sound insulation strip to make appropriate dressing, wait for a while after the time with the hand for thoughtful and careful pressure, you can finish. Try not to close the door. Leave the door open for 20 minutes, then close the door again.

Four, paste the end, prohibit to pull the seal with the hand, prohibit to wash the car in 3 days with water (if you encounter rain that no way) within 24 hours as far as possible do not repeatedly open and close the door;

Five, after the completion of the construction of the door will be a little tight, when driving, must pay attention to whether the door is closed, pay attention to the safety of driving;

Installation position after the closure of the seal must be under positive pressure, so that the back can be fully functional. (note - positive pressure: the pressure direction is perpendicular to the surface of the backing);

Through the installation of these car seals, it can enhance the car body sealing, the sound of closing the door can be more thick, have a thick feeling; Effectively reduce the wind noise, road noise into the car, improve the driving comfort, but also prevent dust and rain into the car; Can be applied to the front and rear cover sealing, waterproof, dustproof sound insulation effect is obvious.